11MnNi5-3 Chemical composition and Mechanical properties
|
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
|---|---|---|---|---|---|---|
| 0.14 | 0.50 | 0.70-1.50 | 0.025 | 0.015 | 0.30-0.80 | |
| Mo | Al | Cu | Nb | Ti | V | Ce |
| ≥0.020 | ≤ 0.05 | ≤ 0.05 | ||||
| N | Co | Pb | B | Other | ||
German DIN of low-temperature steel GangHao and chemical composition
The hot working temperature / ℃ : 1100 ~ 850
Heat treatment temperature / ℃ | is fire: 880 ~ 940
Heat treatment temperature / ℃ | quenching:
Heat treatment temperature / ℃ | tempering: 580 ~ 640
Normal temperature and low temperature mechanical properties | state: at room temperature
Normal temperature and low temperature mechanical properties | σ b/MPa: 420 ~ 530
Normal temperature and low temperature mechanical properties | σ s frequency/MPa: 275
Normal temperature and low temperature mechanical properties | δ 5 (%) frequency: 24
Normal temperature and low temperature mechanical properties | ψ (%) frequency:
Normal temperature and low temperature mechanical properties | AKV (DVM) / J: 70
Steelmaking
The main alloy steel elements have silicon, manganese, chromium, nickel, tungsten, molybdenum, vanadium, titanium, niobium and zirconium, cobalt, aluminum, copper, boron, rare earth, etc. Which vanadium, titanium, niobium and zirconium, etc in steel is strong carbide form elements, as long as there is enough carbon, in the right conditions, to shape their own carbide, when lack of carbon or in high temperature conditions, the one with atomic state into the crystallology; Mn, chromium, tungsten, molybdenum carbide form elements for, some of the atoms in the state to enter the crystallology, another part of form replacement type alloy cementite; Aluminum, copper, nickel, cobalt, silicon carbide is not formed elements, general with atomic state exists in the crystallology. Free cutting steel: in steel join a certain number of one or more than one type of sulphur, phosphorus, lead, calcium, selenium, tellurium and cutting elements to improve its cutting sex of alloy. Also called the automatic machine processing steel, hereinafter referred to as automatic steel. This kind of steel can use high cutting speed and large cutting depth cutting processing. Because of the free cutting steel join element, make steel cutting resistance decreased, and cutting element characteristics of itself and by the formation of the compounds for lubrication cutting tool role, brittle flocks, reducing wear and thus reduce the workpiece surface roughness and the tool life and improve the production efficiency. Spring steel is mainly have good elasticity, and because it is in the dynamic loading environment conditions of the job, so to make the material of spring the main should have high yield strength; Under heavy load in does not cause the plastic deformation; Should have high fatigue strength, load under the action of repeated in with long service life; And have enough toughness and plastic, in case in the impact a role brittle fracture.
Introduction to Our Products:
Production equipment and steel specification, etc
My company can provide more than 350 12 categories, more than 5,000 grades, from the top quality specification group of special steel metal materials.
Smelting equipment: furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode., 0.5 tons - 40 tons), vacuum induction furnace capacity 0.5-10 tons and tons ESR 0.35 tons - 8 tons.
Pressure: forging maxhine 1200 tons - 8,000 tons, 825 type, type, type of 250 650 mill.
polishing machine machining: Φ1- Φ 300, Φ sheller Φ 180; 60 - Car light lathe than 12 meters length, diameter, deep drilling than 12 meters length than 12 meters.
Type: ordinary and ingot ingots refining ingot 0.5 tons - 25 tons. Electricity slag remelting ingot 0.35-8 tons and tons of
Size: round bar rolling material Φ 1.0-280. Forging materials Φ 80-600, Φ diameter steel (Φ1 - Φ 235) x (thickness); 0.5-40. Sheet (0.5-12) x 1000 * 2000, Medium thickness plate rolling, forging, width: experiment.it than 610, Alien: fang, flat, ring, canister, steps axis, etc.
Heat: can provide annealing, normalizing, tempering, quenching, aging, piece.modified special requirements such as heat treatment process delivery of products.
Introduction to Our Products:
Specialized high quality steel
We have the advantages of equipment, technologies and price
Forging/hot rolling/ extrusion of steel
Specifications：
Round bar steel: 1mm to 2000mm
Square-shape steel: 10mm to 1000mm
Plate steel:0.08mm to 800mm
Width: 10mm to 1500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ4-410 mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirement
Excellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
Mechanical properties
Heat treatment
Machining
Welding performance
Related hot word search:ViTa llium ViTa llium steel plates, flat steel,sheet,coil,steel wire,round rods, ViTa llium Strip
ELECTRODE ARC FURNACE; (NON)VACUUM INDUCTION FURNACE; LF; VD; VOD; ESR; CONSUMABLE ELECTRODE VACUUM FURNACE.
