Current Location:Home >> Alloy steel > UNS G23300

UNS G23300

Data Table for:Alloy steel:UNS G23300

Steel grade type	Alloy steel:
Standard
Production specifications	Steel plate,Sheet, Coil,Flat bar,Round bar, Strip steel,wire,All kinds of forgings.
Mchining	Turning Milling Grinding Deep hole drilling: length max 9.8 meters.
Range of work	Round bar steel: 1mm to 2000mm Square-shape steel: 10mm to 1000mm steel Plate/sheet:0.08mm to 800mm Width: 10mm to 1500mm Lenth: We can supply any lenth based on the customer's requirement. Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes Tubings: OD: φ4-410 mm, with wall thickness ranging from 1-35 mm.
Heat treatment	Normalizing,Annealing,Tempering,Quenching,Hardening and tempering,Seasoning,Surface hardening,Carburizing

UNS G23300 Chemical composition and Mechanical properties

AISI 2330 steel (UNS G23300)
Categories: Metal; Ferrous Metal; Alloy Steel; Low Alloy Steel

Key Words: UNS G23300

Physical Properties	Metric	English	Comments
Density	7.75 g/cc	0.280 lb/in³

Mechanical Properties	Metric	English	Comments
Hardness, Brinell	248	248
Tensile Strength, Ultimate	841 MPa	122000 psi
Tensile Strength, Yield	689 MPa @Strain 0.200 %	99900 psi @Strain 0.200 %
Elongation at Break	19.0 %	19.0 %
Modulus of Elasticity	201 - 209 GPa	29200 - 30300 ksi
Bulk Modulus	160 - 170 GPa	23200 - 24700 ksi
Poissons Ratio	0.270 - 0.300	0.270 - 0.300
Shear Modulus	81.0 - 82.0 GPa	11700 - 11900 ksi

Thermal Properties	Metric	English	Comments
CTE, linear	10.9 µm/m-°C	6.06 µin/in-°F

Users viewing this material also viewed the following:
AISI 2515 steel (UNS G25150)
AISI 3120 steel (UNS G31200)
AISI 3140
AISI 4063 steel (UNS G40630)
AISI 3150 steel (UNS G31500)

M2330 / 100228

Mechanical Properties

Properties		Conditions
Properties		T (°C)	Treatment
Density (×1000 kg/m3)	7.7-8.03	25
Poisson's Ratio	0.27-0.30	25
Elastic Modulus (GPa)	190-210	25
Tensile Strength (Mpa)	1158	25	oil quenched, fine grained, tempered at 425°C
Yield Strength (Mpa)	1034
Elongation (%)	15
Reduction in Area (%)	53
Hardness (HB)	335	25	oil quenched, fine grained, tempered at 425°C

Thermal Properties

Properties		Conditions
Properties		T (°C)	Treatment
Thermal Conductivity (W/m-K)	42.7	100
Specific Heat (J/kg-K)	477	50-100

Physical Properties

Quantity	Value	Unit
Thermal expansion	16 - 17	e-6/K
Thermal conductivity	16 - 16	W/m.K
Specific heat	500 - 500	J/kg.K
Melting temperature	1370 - 1400	°C
Service temperature	0 - 500	°C
Density	8000 - 8000	kg/m3
Resistivity	0.7 - 0.7	Ohm.mm2/m

Hot keywords:UNS G23300

Previous page:35Cr
Next pageUNS K92810

Favorite