Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaXH50BMTKΦЮ(ЭП57) material is Russia COST standard deformation of high temperature alloy.
Chemical composition of XH50BMTKΦЮ(ЭП57), XH50BMTKΦЮ(ЭП57) mechanical properties, XH50BMTKΦЮ(ЭП57) datasheet, XH50BMTKΦЮ(ЭП57) equivalent grade, Heat treatment and temperature process of XH50BMTKΦЮ(ЭП57).
XH50BMTKΦЮ(ЭП57) |
C | 0.08-0.14 |
Si | Max 0.50 |
Mn | Max 0.50 |
P | Max 0.015 |
S | Max 0.010 |
Cr | 9.0-12.0 |
Ni | Balance |
Mo | 4.0-6.0 |
V | 0.2-0.8 |
W | 5.0-7.0 |
Co | 14.0-16.0 |
B | Max 0.02 |
Al | 3.7-4.7 |
Ti | 2.0-2.8 |
Rp0.2 (MPa) | 248 (≥) |
Rm (MPa) | 175 (≥) |
AKV (J) | 14 |
A (%) | 11 |
Z (%) | 42 |
Hardness | HBW 422 |
XH50BMTKΦЮ(ЭП57) Round bar: | 1mm-800mm |
XH50BMTKΦЮ(ЭП57) Square bar: | 10mm * 10mm-600mm *600mm |
XH50BMTKΦЮ(ЭП57) Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
XH50BMTKΦЮ(ЭП57) Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
XH50BMTKΦЮ(ЭП57) Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
XH50BMTKΦЮ(ЭП57) Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |