Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In China1.4318 material is AMS SA/EN 10028-7 Specification for flat products made of steels for pressure purposes - Part 7: Stainless steels Specification for flat products made of steels for pressure purposes - Part 7: Stainless steels.
Chemical composition of 1.4318, 1.4318 mechanical properties, 1.4318 datasheet, 1.4318 equivalent grade, Heat treatment and temperature process of 1.4318.
AMS SA/EN 10028-7 Specification for flat products made of steels for pressure purposes - Part 7: Stainless steels |
C: | Max | 0.08 |
Si: | Max | 1.00 |
Mn: | Max | 2.00 |
P: | Max | 0.045 |
S: | Max | 0.03 |
Ni: | 13.00 | 15.00 |
Cr: | 17.00 | 19.00 |
Al: | Max | Min |
Cu: | Max | Min |
Ti: | Max | Min |
Fe: | Max | Min |
N: | Max | Min |
Mo: | 1.75 | 2.75 |
V: | Max | Min |
Rp0.2 (MPa) | 323 (≥) |
Rm (MPa) | 864 (≥) |
AKV (J) | 22 |
A (%) | 34 |
Z (%) | 22 |
Hardness | HBW 211 |
1.4318 Round bar: | 1mm-800mm |
1.4318 Square bar: | 10mm * 10mm-600mm *600mm |
1.4318 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
1.4318 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
1.4318 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
1.4318 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |