Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In China17-22-A V material is UNS SAE AMS 6303H (2012) Steel Bars and Forgings, Low Alloy, Heat-Resistant 0.65Si - 1.25Cr - 0.50Mo - 0.85V (0.25 - 0.30C) UNS SAE AMS 6436C (2001) Sheet, Strip and Plate, Low-alloy, Heat Resistant, 0,65Si - 1,25Cr - 0,50Mo - 0,85V - (0,25-0,30C) UNS SAE J 467 (1968) Special Purpose Alloys ("Superalloys") Steel Bars and Forgings, Low Alloy, Heat-Resistant 0.65Si - 1.25Cr - 0.50Mo - 0.85V (0.25 - 0.30C).
Chemical composition of 17-22-A V, 17-22-A V mechanical properties, 17-22-A V datasheet, 17-22-A V equivalent grade, Heat treatment and temperature process of 17-22-A V.
UNS SAE AMS 6303H (2012) Steel Bars and Forgings, Low Alloy, Heat-Resistant 0.65Si - 1.25Cr - 0.50Mo - 0.85V (0.25 - 0.30C) |
UNS SAE AMS 6436C (2001) Sheet, Strip and Plate, Low-alloy, Heat Resistant, 0,65Si - 1,25Cr - 0,50Mo - 0,85V - (0,25-0,30C) |
UNS SAE J 467 (1968) Special Purpose Alloys ("Superalloys") |
17-22-A |
17-22-A |
17-22-A |
17-22-A |
17-22-A |
17-22-A S |
17-22-A S |
17-22-A S |
17-22-A S |
17-22-A S |
17-22-A S |
17-22-A S |
17-22-A V |
17-22-A V |
17-22-A V |
17-22-A V |
17-22-A V |
17-22-A S |
17-22-A S |
17-22-A S |
C: | Max | 0.28 |
Si: | Max | 0.65 |
Mn: | Max | 0.75 |
P: | Max | Min |
S: | Max | Min |
Ni: | Max | Min |
Cr: | Max | 1.25 |
Al: | Max | Min |
Cu: | Max | Min |
Ti: | Max | Min |
Fe: | remaining | Min |
V: | Max | 0.85 |
Mo: | Max | 0.50 |
Rp0.2 (MPa) | 292 (≥) |
Rm (MPa) | 695 (≥) |
AKV (J) | 23 |
A (%) | 13 |
Z (%) | 21 |
Hardness | HBW 243 |
17-22-A V Round bar: | 1mm-800mm |
17-22-A V Square bar: | 10mm * 10mm-600mm *600mm |
17-22-A V Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
17-22-A V Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
17-22-A V Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
17-22-A V Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |
1.2714 Hot-Work Mould Steel Stock List - 2019-10 |