Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaA 1082 Grade 31803 material is SAE A1082/A1082M (2012) High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications.
Chemical composition of A 1082 Grade 31803, A 1082 Grade 31803 mechanical properties, A 1082 Grade 31803 datasheet, A 1082 Grade 31803 equivalent grade, Heat treatment and temperature process of A 1082 Grade 31803.
SAE A1082/A1082M (2012) High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications |
C: | Max | 0.08 |
Si: | Max | 1.00 |
Mn: | Max | 2.00 |
P: | Max | 0.045 |
S: | Max | 0.03 |
Ni: | 13.00 | 15.00 |
Cr: | 17.00 | 19.00 |
Al: | Max | Min |
Cu: | Max | Min |
Ti: | Max | Min |
Fe: | Max | Min |
N: | Max | Min |
Mo: | 1.75 | 2.75 |
V: | Max | Min |
Rp0.2 (MPa) | 772 (≥) |
Rm (MPa) | 186 (≥) |
AKV (J) | 14 |
A (%) | 32 |
Z (%) | 44 |
Hardness | HBW 313 |
A 1082 Grade 31803 Round bar: | 1mm-800mm |
A 1082 Grade 31803 Square bar: | 10mm * 10mm-600mm *600mm |
A 1082 Grade 31803 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
A 1082 Grade 31803 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
A 1082 Grade 31803 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
A 1082 Grade 31803 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |