Certified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In China
A 29 41L35
A 29 41L35 material is SAE A 29/A 29M (2012) Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for.
Chemical composition of A 29 41L35, A 29 41L35 mechanical properties, A 29 41L35 datasheet, A 29 41L35 equivalent grade, Heat treatment and temperature process of A 29 41L35.
A 29 41L35 property sheet
A 29 41L35 Spec.
| SAE A 29/A 29M (2012) Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for |
Related Materials
Chemical Composition of A 29 41L35
| C: | Max | 0.01 |
| Si: | Max | 0.20 |
| Mn: | Max | 0.30 |
| P: | Max | Min |
| S: | Max | Min |
| Ni: | Max | 0.15 |
| Cr: | 28.00 | 30.00 |
| Al: | Max | Min |
| Cu: | Max | 0.15 |
| Ti: | Max | Min |
| Fe: | Max | Min |
| N: | Max | 0.02 |
| Mo: | 3.50 | 4.20 |
Mechanical Properties of A 29 41L35
| Rp0.2 (MPa) | 586 (≥) |
| Rm (MPa) | 445 (≥) |
| AKV (J) | 43 |
| A (%) | 14 |
| Z (%) | 11 |
| Hardness | HBW 322 |
A 29 41L35 shape and dimensions
| A 29 41L35 Round bar: | 1mm-800mm |
| A 29 41L35 Square bar: | 10mm * 10mm-600mm *600mm |
| A 29 41L35 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
| A 29 41L35 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
| A 29 41L35 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
| A 29 41L35 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |
©Longhai Special Steel © 2005-2024
