Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaA 352 J42215 material is SAE A 352/A 352M (2006) Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service.
Chemical composition of A 352 J42215, A 352 J42215 mechanical properties, A 352 J42215 datasheet, A 352 J42215 equivalent grade, Heat treatment and temperature process of A 352 J42215.
SAE A 352/A 352M (2006) Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service |
GH4220 |
A 176 S42200 |
A 565 S42200 |
S42200 |
S42201 |
A 176 S42200 |
A 565 S42200 |
S42200 |
HNV8 |
422 |
422 |
422 |
422 |
422 |
422 |
422 SS |
422M |
422M (Cast) |
4422 |
4422 |
C: | Max | 0.22 |
Si: | Max | 0.40 |
Mn: | Max | 0.75 |
P: | Max | Min |
S: | Max | Min |
Ni: | Max | 0.75 |
Cr: | Max | 12.50 |
Al: | Max | Min |
Cu: | Max | Min |
Ti: | Max | Min |
Fe: | Max | remaining |
N: | Max | Min |
Mo: | Max | 1.00 |
W: | Max | 1.00 |
V: | Max | 0.22 |
Rp0.2 (MPa) | 172 (≥) |
Rm (MPa) | 373 (≥) |
AKV (J) | 22 |
A (%) | 44 |
Z (%) | 34 |
Hardness | HBW 341 |
A 352 J42215 Round bar: | 1mm-800mm |
A 352 J42215 Square bar: | 10mm * 10mm-600mm *600mm |
A 352 J42215 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
A 352 J42215 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
A 352 J42215 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
A 352 J42215 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |
422 Stainless Steel|Alloy 422|UNS S42200|616|B4B Stock |