Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaA 959 Type 317LMN material is SAE A 959 (2011) Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels.
Chemical composition of A 959 Type 317LMN, A 959 Type 317LMN mechanical properties, A 959 Type 317LMN datasheet, A 959 Type 317LMN equivalent grade, Heat treatment and temperature process of A 959 Type 317LMN.
SAE A 959 (2011) Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
C: | Max | 0.30 |
Si: | Max | 0.70 |
Mn: | Max | 2.00 |
P: | Max | 0.045 |
S: | Max | 0.03 |
Ni: | 13.00 | 27.00 |
Cr: | 18.00 | 20.00 |
Al: | Max | Min |
Cu: | Max | 0.75 |
Ti: | Max | Min |
Fe: | Max | Min |
N: | Max | 0.10 |
Mo: | 4.00 | 5.00 |
V: | Max | 0.08 |
Rp0.2 (MPa) | 659 (≥) |
Rm (MPa) | 781 (≥) |
AKV (J) | 33 |
A (%) | 42 |
Z (%) | 21 |
Hardness | HBW 332 |
A 959 Type 317LMN Round bar: | 1mm-800mm |
A 959 Type 317LMN Square bar: | 10mm * 10mm-600mm *600mm |
A 959 Type 317LMN Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
A 959 Type 317LMN Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
A 959 Type 317LMN Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
A 959 Type 317LMN Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |