Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaB 435 R30556 material is SAE B 435 (2011) UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip.
Chemical composition of B 435 R30556, B 435 R30556 mechanical properties, B 435 R30556 datasheet, B 435 R30556 equivalent grade, Heat treatment and temperature process of B 435 R30556.
SAE B 435 (2011) UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip |
C: | Max | 0.01 |
Si: | Max | 0.05 |
Mn: | Max | 1.50 |
P: | Max | 0.04 |
S: | Max | 0.01 |
Ni: | Max | remaining |
Cr: | 0.50 | 1.50 |
Al: | 0.10 | 0.50 |
Cu: | Max | 0.50 |
Ti: | Max | Min |
Fe: | 1.00 | 6.00 |
Mo: | 26.00 | 30.00 |
Co: | Max | 2.50 |
Rp0.2 (MPa) | 625 (≥) |
Rm (MPa) | 736 (≥) |
AKV (J) | 43 |
A (%) | 21 |
Z (%) | 34 |
Hardness | HBW 132 |
B 435 R30556 Round bar: | 1mm-800mm |
B 435 R30556 Square bar: | 10mm * 10mm-600mm *600mm |
B 435 R30556 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
B 435 R30556 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
B 435 R30556 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
B 435 R30556 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |