Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaB 444 N06852 material is SAE B 435 (2011) UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip.
Chemical composition of B 444 N06852, B 444 N06852 mechanical properties, B 444 N06852 datasheet, B 444 N06852 equivalent grade, Heat treatment and temperature process of B 444 N06852.
SAE B 435 (2011) UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip |
C: | Max | 0.01 |
Si: | Max | 0.05 |
Mn: | Max | 1.50 |
P: | Max | 0.04 |
S: | Max | 0.01 |
Ni: | Max | remaining |
Cr: | 0.50 | 1.50 |
Al: | 0.10 | 0.50 |
Cu: | Max | 0.50 |
Ti: | Max | Min |
Fe: | 1.00 | 6.00 |
Mo: | 26.00 | 30.00 |
Co: | Max | 2.50 |
Rp0.2 (MPa) | 559 (≥) |
Rm (MPa) | 462 (≥) |
AKV (J) | 24 |
A (%) | 34 |
Z (%) | 13 |
Hardness | HBW 342 |
B 444 N06852 Round bar: | 1mm-800mm |
B 444 N06852 Square bar: | 10mm * 10mm-600mm *600mm |
B 444 N06852 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
B 444 N06852 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
B 444 N06852 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
B 444 N06852 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |