Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaB 446 N06650 material is SAE B 446 (2008) Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650) Rod and Bar Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650) Rod and Bar.
Chemical composition of B 446 N06650, B 446 N06650 mechanical properties, B 446 N06650 datasheet, B 446 N06650 equivalent grade, Heat treatment and temperature process of B 446 N06650.
SAE B 446 (2008) Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650) Rod and Bar |
C: | Max | 0.01 |
Si: | Max | 0.05 |
Mn: | Max | 1.50 |
P: | Max | 0.04 |
S: | Max | 0.01 |
Ni: | Max | remaining |
Cr: | 0.50 | 1.50 |
Al: | 0.10 | 0.50 |
Cu: | Max | 0.50 |
Ti: | Max | Min |
Fe: | 1.00 | 6.00 |
Mo: | 26.00 | 30.00 |
Co: | Max | 2.50 |
Rp0.2 (MPa) | 659 (≥) |
Rm (MPa) | 746 (≥) |
AKV (J) | 23 |
A (%) | 12 |
Z (%) | 22 |
Hardness | HBW 411 |
B 446 N06650 Round bar: | 1mm-800mm |
B 446 N06650 Square bar: | 10mm * 10mm-600mm *600mm |
B 446 N06650 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
B 446 N06650 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
B 446 N06650 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
B 446 N06650 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |