Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaB 462 R20033 material is SAE B 462 (2010) Standard Specification for Forged or Rolled UNS N06030, UNS N06022, UNS N06035, UNS N06200, UNS N06059, UNS N10362, UNS N06686, UNS N08020, UNS N08024, UNS N08026, UNS N08367, UNS N10276, UNS N10665, UNS N10675, UNS N10629, UNS N08031, UNS N06045 Standard Specification for Forged or Rolled UNS N06030, UNS N06022, UNS N06035, UNS N06200, UNS N06059, UNS N10362, UNS N06686, UNS N08020, UNS N08024, UNS N08026, UNS N08367, UNS N10276, UNS N10665, UNS N10675, UNS N10629, UNS N08031, UNS N06045.
Chemical composition of B 462 R20033, B 462 R20033 mechanical properties, B 462 R20033 datasheet, B 462 R20033 equivalent grade, Heat treatment and temperature process of B 462 R20033.
SAE B 462 (2010) Standard Specification for Forged or Rolled UNS N06030, UNS N06022, UNS N06035, UNS N06200, UNS N06059, UNS N10362, UNS N06686, UNS N08020, UNS N08024, UNS N08026, UNS N08367, UNS N10276, UNS N10665, UNS N10675, UNS N10629, UNS N08031, UNS N06045 |
C: | Max | 0.01 |
Si: | Max | 0.05 |
Mn: | Max | 1.50 |
P: | Max | 0.04 |
S: | Max | 0.01 |
Ni: | Max | remaining |
Cr: | 0.50 | 1.50 |
Al: | 0.10 | 0.50 |
Cu: | Max | 0.50 |
Ti: | Max | Min |
Fe: | 1.00 | 6.00 |
Mo: | 26.00 | 30.00 |
Co: | Max | 2.50 |
Rp0.2 (MPa) | 118 (≥) |
Rm (MPa) | 159 (≥) |
AKV (J) | 41 |
A (%) | 14 |
Z (%) | 43 |
Hardness | HBW 424 |
B 462 R20033 Round bar: | 1mm-800mm |
B 462 R20033 Square bar: | 10mm * 10mm-600mm *600mm |
B 462 R20033 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
B 462 R20033 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
B 462 R20033 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
B 462 R20033 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |