High quality special steel supplier.Old rev.
  • Certified Company

    DNV&ABS
  • Certified Company

    ISO 9001:2008
  • R&D Production

    In China

J 2613


J 2613 material is UNS SAE J 2613 (2009) Welded Flash Controlled, High Strength (500 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending, Double Flaring, and Bending Welded Flash Controlled, High Strength (500 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending, Double Flaring, and Bending.

Chemical composition of J 2613, J 2613 mechanical properties, J 2613 datasheet, J 2613 equivalent grade, Heat treatment and temperature process of J 2613.


J 2613 property sheet

J 2613 Spec.

UNS SAE J 2613 (2009)
Welded Flash Controlled, High Strength (500 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending, Double Flaring, and Bending

Chemical Composition of J 2613

C: Max 0.06
Si: Max 0.75
Mn: Max 0.75
P: Max Min
S: Max Min
Ni: Max 0.50
Cr: 25.00 27.00
Al: Max Min
Cu: Max 0.20
Ti: Max Min
Fe: Max Min
N: Max 0.04
Mo: 0.75 1.50

Mechanical Properties of J 2613

Rp0.2 (MPa) 328 (≥)
Rm (MPa) 763 (≥)
AKV (J) 14
A (%) 34
Z (%) 43
Hardness HBW 342

J 2613 shape and dimensions

J 2613 Round bar: 1mm-800mm
J 2613 Square bar: 10mm * 10mm-600mm *600mm
J 2613 Flat bar: Thickness:8mm-800mm Width:10mm to 1500mm
J 2613 Sheet or Plate: Thickness:3mm-80mm Width:1.5mm to 1500mm
J 2613 Strip or Coil: Thickness:0.1mm-3mm Width:1.5mm-1500mm
J 2613 Forgings: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes

J 2613 Relevant products

1.4980 Round Bar

1.4980 Round Bar

1 4980 Round Bar
1.4980 Round Bar

1.4980 Round Bar

1 4980 Round Bar