High quality special steel supplier.Old rev.
  • Certified Company

    DNV&ABS
  • Certified Company

    ISO 9001:2008
  • R&D Production

    In China

J 2614


J 2614 material is UNS SAE J 2614 (2009) Welded and Cold-Drawn, High Strength (500 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending and Flaring Welded and Cold-Drawn, High Strength (500 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending and Flaring.

Chemical composition of J 2614, J 2614 mechanical properties, J 2614 datasheet, J 2614 equivalent grade, Heat treatment and temperature process of J 2614.


J 2614 property sheet

J 2614 Spec.

UNS SAE J 2614 (2009)
Welded and Cold-Drawn, High Strength (500 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending and Flaring

Chemical Composition of J 2614

C: Max 0.06
Si: Max 0.75
Mn: Max 0.75
P: Max Min
S: Max Min
Ni: Max 0.50
Cr: 25.00 27.00
Al: Max Min
Cu: Max 0.20
Ti: Max Min
Fe: Max Min
N: Max 0.04
Mo: 0.75 1.50

Mechanical Properties of J 2614

Rp0.2 (MPa) 491 (≥)
Rm (MPa) 566 (≥)
AKV (J) 22
A (%) 11
Z (%) 12
Hardness HBW 312

J 2614 shape and dimensions

J 2614 Round bar: 1mm-800mm
J 2614 Square bar: 10mm * 10mm-600mm *600mm
J 2614 Flat bar: Thickness:8mm-800mm Width:10mm to 1500mm
J 2614 Sheet or Plate: Thickness:3mm-80mm Width:1.5mm to 1500mm
J 2614 Strip or Coil: Thickness:0.1mm-3mm Width:1.5mm-1500mm
J 2614 Forgings: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes

J 2614 Relevant products

1.4980 Round Bar

1.4980 Round Bar

1 4980 Round Bar
1.4980 Round Bar

1.4980 Round Bar

1 4980 Round Bar