Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaSB-435 N06002 material is AMS SB-435 UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip.
Chemical composition of SB-435 N06002, SB-435 N06002 mechanical properties, SB-435 N06002 datasheet, SB-435 N06002 equivalent grade, Heat treatment and temperature process of SB-435 N06002.
AMS SB-435 UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip |
C: | Max | 0.01 |
Si: | Max | 0.05 |
Mn: | Max | 1.50 |
P: | Max | 0.04 |
S: | Max | 0.01 |
Ni: | Max | remaining |
Cr: | 0.50 | 1.50 |
Al: | 0.10 | 0.50 |
Cu: | Max | 0.50 |
Ti: | Max | Min |
Fe: | 1.00 | 6.00 |
Mo: | 26.00 | 30.00 |
Co: | Max | 2.50 |
Rp0.2 (MPa) | 395 (≥) |
Rm (MPa) | 776 (≥) |
AKV (J) | 24 |
A (%) | 31 |
Z (%) | 34 |
Hardness | HBW 233 |
SB-435 N06002 Round bar: | 1mm-800mm |
SB-435 N06002 Square bar: | 10mm * 10mm-600mm *600mm |
SB-435 N06002 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
SB-435 N06002 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
SB-435 N06002 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
SB-435 N06002 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |