Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaSB-462 N06686 material is AMS SB-462 Standard Specification for Forged or Rolled UNS N06030, UNS N06022, UNS N06035, UNS N06200, UNS N06059, UNS N10362, UNS N06686, UNS N08020, UNS N08024, UNS N08026, UNS N08367, UNS N10276, UNS N10665, UNS N10675, UNS N10629, UNS N08031, UNS N06045 Standard Specification for Forged or Rolled UNS N06030, UNS N06022, UNS N06035, UNS N06200, UNS N06059, UNS N10362, UNS N06686, UNS N08020, UNS N08024, UNS N08026, UNS N08367, UNS N10276, UNS N10665, UNS N10675, UNS N10629, UNS N08031, UNS N06045.
Chemical composition of SB-462 N06686, SB-462 N06686 mechanical properties, SB-462 N06686 datasheet, SB-462 N06686 equivalent grade, Heat treatment and temperature process of SB-462 N06686.
AMS SB-462 Standard Specification for Forged or Rolled UNS N06030, UNS N06022, UNS N06035, UNS N06200, UNS N06059, UNS N10362, UNS N06686, UNS N08020, UNS N08024, UNS N08026, UNS N08367, UNS N10276, UNS N10665, UNS N10675, UNS N10629, UNS N08031, UNS N06045 |
C: | Max | 0.01 |
Si: | Max | 0.05 |
Mn: | Max | 1.50 |
P: | Max | 0.04 |
S: | Max | 0.01 |
Ni: | Max | remaining |
Cr: | 0.50 | 1.50 |
Al: | 0.10 | 0.50 |
Cu: | Max | 0.50 |
Ti: | Max | Min |
Fe: | 1.00 | 6.00 |
Mo: | 26.00 | 30.00 |
Co: | Max | 2.50 |
Rp0.2 (MPa) | 671 (≥) |
Rm (MPa) | 637 (≥) |
AKV (J) | 23 |
A (%) | 34 |
Z (%) | 33 |
Hardness | HBW 313 |
SB-462 N06686 Round bar: | 1mm-800mm |
SB-462 N06686 Square bar: | 10mm * 10mm-600mm *600mm |
SB-462 N06686 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
SB-462 N06686 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
SB-462 N06686 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
SB-462 N06686 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |