High quality special steel supplier.Old rev.
  • Certified Company

    DNV&ABS
  • Certified Company

    ISO 9001:2008
  • R&D Production

    In China

00Cr18Ni10N


00Cr18Ni10N material is GB GB 13296 (2007) Seamless stainless steel tubes for boiler and heat exchanger GB GB/T 1220 (1992) Stainless steel bars GB GB/T 14975 (2002) Stainless steel seamless tubes for structures GB GB/T 14976 (2002) Stainless steel seamless tubes for fluid transport GB GB/T 3280 (2007) Cold rolled stainless steel sheets and plates GB GB/T 4237 (1992) Hot rolled stainless steel sheets and plates GB GB/T 4239 (1991) Cold rolled stainless steel and heat resisting steel strips In 00cr19ni10 adding N, on the basis of the above grades also features, use the same as the 0 cr19ni9n, but better intergranular corrosion resistance.

Chemical composition of 00Cr18Ni10N, 00Cr18Ni10N mechanical properties, 00Cr18Ni10N datasheet, 00Cr18Ni10N equivalent grade, Heat treatment and temperature process of 00Cr18Ni10N.


00Cr18Ni10N property sheet

00Cr18Ni10N Spec.

GB GB 13296 (2007)
Seamless stainless steel tubes for boiler and heat exchanger
GB GB/T 1220 (1992)
Stainless steel bars
GB GB/T 14975 (2002)
Stainless steel seamless tubes for structures
GB GB/T 14976 (2002)
Stainless steel seamless tubes for fluid transport
GB GB/T 3280 (2007)
Cold rolled stainless steel sheets and plates
GB GB/T 4237 (1992)
Hot rolled stainless steel sheets and plates
GB GB/T 4239 (1991)
Cold rolled stainless steel and heat resisting steel strips

Related Materials

00Cr18Ni10N

Chemical Composition of 00Cr18Ni10N

C: Max 0.030
Si: Max 1.00
Mn: Max 2.00
P: Max 0.035
S: Max 0.030
Ni: 8.50 11.50
Cr: 17.00 19.00
N: 0.12 0.22

Mechanical Properties of 00Cr18Ni10N

Rp0.2 (MPa) 634 (≥)
Rm (MPa) 411 (≥)
AKV (J) 34
A (%) 44
Z (%) 13
Hardness HBW 122

00Cr18Ni10N shape and dimensions

00Cr18Ni10N Round bar: 1mm-800mm
00Cr18Ni10N Square bar: 10mm * 10mm-600mm *600mm
00Cr18Ni10N Flat bar: Thickness:8mm-800mm Width:10mm to 1500mm
00Cr18Ni10N Sheet or Plate: Thickness:3mm-80mm Width:1.5mm to 1500mm
00Cr18Ni10N Strip or Coil: Thickness:0.1mm-3mm Width:1.5mm-1500mm
00Cr18Ni10N Forgings: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes