High quality special steel supplier.Old rev.
  • Certified Company

    DNV&ABS
  • Certified Company

    ISO 9001:2008
  • R&D Production

    In China

1.4335


1.4335 material is AFNOR NF EN 10028-7 Flat products made of steels for pressure purposes - Part 7: Stainless steels AFNOR NF EN 10088-1 Stainless steels - Part 1: List of stainless steels AFNOR NF EN 10088-2 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes AFNOR NF EN 10088-3 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes AFNOR NF EN 10088-4 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes AFNOR NF EN 10216-5 (2004) Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes AFNOR NF EN 10253-3 Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements AFNOR NF EN 10253-4 Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements AFNOR NF EN 10297-2 (2005) Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel.

Chemical composition of 1.4335, 1.4335 mechanical properties, 1.4335 datasheet, 1.4335 equivalent grade, Heat treatment and temperature process of 1.4335.


1.4335 property sheet

1.4335 Spec.

AFNOR NF EN 10028-7
Flat products made of steels for pressure purposes - Part 7: Stainless steels
AFNOR NF EN 10088-1
Stainless steels - Part 1: List of stainless steels
AFNOR NF EN 10088-2
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
AFNOR NF EN 10088-3
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
AFNOR NF EN 10088-4
Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
AFNOR NF EN 10216-5 (2004)
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
AFNOR NF EN 10253-3
Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
AFNOR NF EN 10253-4
Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
AFNOR NF EN 10297-2 (2005)
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel

Related Materials

X1CrNi25-21
1.4335
X1CrNi25-21
1.4335

Chemical Composition of 1.4335

C: Max 0.020
Si: Max 0.25
Mn: Max 2.00
P: Max 0.025
S: Max 0.010
Cr: 24.00 26.00
Mo: Max 0.20
Ni: 20.00 22.00
N: Max 0.11

Mechanical Properties of 1.4335

Rp0.2 (MPa) 229 (≥)
Rm (MPa) 412 (≥)
AKV (J) 34
A (%) 44
Z (%) 31
Hardness HBW 124

1.4335 shape and dimensions

1.4335 Round bar: 1mm-800mm
1.4335 Square bar: 10mm * 10mm-600mm *600mm
1.4335 Flat bar: Thickness:8mm-800mm Width:10mm to 1500mm
1.4335 Sheet or Plate: Thickness:3mm-80mm Width:1.5mm to 1500mm
1.4335 Strip or Coil: Thickness:0.1mm-3mm Width:1.5mm-1500mm
1.4335 Forgings: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes