Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In China15-5PH material is ASTM SAE AMS 5346C (2006) Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb (Nb) - 2.8Cu Solution and Precipitation Heat Treated (H925) 180 ksi (1241 MPa) Tensile Strength (15-5) ASTM SAE AMS 5347B (2006) Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb (Nb) - 2.8Cu Solution and Precipitation Heat Treated (H1000) 150 ksi (1034 MPa) Tensile Strength (15-5) ASTM SAE AMS 5357C (2011) Steel, Corrosion Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution Heat Treated, Precipitation Hardenable ASTM SAE AMS 5400B (2007) Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution and Precipitation Heat Treated (H935) 170 ksi (1172 MPa) Tensile Strength ASTM SAE AMS 5659N (2012) Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30CB (Nb) - 3.5Cu Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable High temperature alloys and other special alloys.
Chemical composition of 15-5PH, 15-5PH mechanical properties, 15-5PH datasheet, 15-5PH equivalent grade, Heat treatment and temperature process of 15-5PH.
ASTM SAE AMS 5346C (2006) Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb (Nb) - 2.8Cu Solution and Precipitation Heat Treated (H925) 180 ksi (1241 MPa) Tensile Strength (15-5) |
ASTM SAE AMS 5347B (2006) Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb (Nb) - 2.8Cu Solution and Precipitation Heat Treated (H1000) 150 ksi (1034 MPa) Tensile Strength (15-5) |
ASTM SAE AMS 5357C (2011) Steel, Corrosion Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution Heat Treated, Precipitation Hardenable |
ASTM SAE AMS 5400B (2007) Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution and Precipitation Heat Treated (H935) 170 ksi (1172 MPa) Tensile Strength |
ASTM SAE AMS 5659N (2012) Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30CB (Nb) - 3.5Cu Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable |
15-5PH Round bar: | 1mm-800mm |
15-5PH Square bar: | 10mm * 10mm-600mm *600mm |
15-5PH Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
15-5PH Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
15-5PH Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
15-5PH Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |