Certified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In China
2HR501
2HR501 material is B.S. BS 2HR 501 (1973) Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold drawn wire for springs (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5) B.S. BS 3HR 501 (2011) Specification for nickel-chromium-cobalt-titanium- aluminium heat-resisting alloy cold drawn wire for springs and springs (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5) Specification for nickel-chromium-cobalt-titanium- aluminium heat-resisting alloy cold drawn wire for springs and springs (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5).
Chemical composition of 2HR501, 2HR501 mechanical properties, 2HR501 datasheet, 2HR501 equivalent grade, Heat treatment and temperature process of 2HR501.
2HR501 property sheet
2HR501 Spec.
| B.S. BS 2HR 501 (1973) Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold drawn wire for springs (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5) |
| B.S. BS 3HR 501 (2011) Specification for nickel-chromium-cobalt-titanium- aluminium heat-resisting alloy cold drawn wire for springs and springs (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5) |
Related Materials
| 2HR501 |
Chemical Composition of 2HR501
| C: | Max | 0.13 |
| Si: | Max | 1.00 |
| Mn: | Max | 1.00 |
| P: | Max | Min |
| S: | Max | 0.015 |
| Cr: | 18.00 | 21.00 |
| Ni: | Max | remaining |
| Mo: | Max | Min |
| Co: | 15.00 | 21.00 |
| Ti: | 2.00 | 3.00 |
| Fe: | Max | 1.50 |
| Al: | 1.00 | 2.00 |
| Cu: | Max | 0.20 |
| Zr: | Max | 0.15 |
| B: | Max | 0.020 |
| Bi: | Max | 0.0001 |
| Pb: | Max | 0.002 |
| Ag: | Max | 0.0005 |
Mechanical Properties of 2HR501
| Rp0.2 (MPa) | 127 (≥) |
| Rm (MPa) | 465 (≥) |
| AKV (J) | 42 |
| A (%) | 13 |
| Z (%) | 12 |
| Hardness | HBW 311 |
2HR501 shape and dimensions
| 2HR501 Round bar: | 1mm-800mm |
| 2HR501 Square bar: | 10mm * 10mm-600mm *600mm |
| 2HR501 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
| 2HR501 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
| 2HR501 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
| 2HR501 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |
©Longhai Special Steel 2024
