Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaA 29 94B30 material is SAE A 29/A 29M (2012) Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for.
Chemical composition of A 29 94B30, A 29 94B30 mechanical properties, A 29 94B30 datasheet, A 29 94B30 equivalent grade, Heat treatment and temperature process of A 29 94B30.
SAE A 29/A 29M (2012) Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for |
C: | 0.08 | 0.15 |
Si: | Max | 0.75 |
Mn: | 1.00 | 2.00 |
P: | Max | Min |
S: | Max | 0.03 |
Ni: | 8.50 | 10.50 |
Cr: | 27.00 | 31.00 |
Al: | Max | Min |
Cu: | Max | 0.50 |
Ti: | Max | Min |
Fe: | Max | Min |
N: | Max | Min |
Mo: | Max | 0.50 |
Rp0.2 (MPa) | 335 (≥) |
Rm (MPa) | 652 (≥) |
AKV (J) | 31 |
A (%) | 11 |
Z (%) | 41 |
Hardness | HBW 444 |
A 29 94B30 Round bar: | 1mm-800mm |
A 29 94B30 Square bar: | 10mm * 10mm-600mm *600mm |
A 29 94B30 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
A 29 94B30 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
A 29 94B30 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
A 29 94B30 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |