Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaA 403 CR347LN material is SAE A 403/A 403M (2012) Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings.
Chemical composition of A 403 CR347LN, A 403 CR347LN mechanical properties, A 403 CR347LN datasheet, A 403 CR347LN equivalent grade, Heat treatment and temperature process of A 403 CR347LN.
SAE A 403/A 403M (2012) Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings |
C: | 0.005 | 0.02 |
Si: | Max | 0.75 |
Mn: | Max | 2.00 |
P: | Max | 0.04 |
S: | Max | 0.03 |
Ni: | 9.00 | 13.00 |
Cr: | 17.00 | 20.00 |
Al: | Max | Min |
Cu: | Max | Min |
Ti: | Max | Min |
Fe: | Max | Min |
N: | 0.06 | 0.10 |
Mo: | Max | Min |
V: | Max | Min |
Rp0.2 (MPa) | 669 (≥) |
Rm (MPa) | 651 (≥) |
AKV (J) | 24 |
A (%) | 31 |
Z (%) | 31 |
Hardness | HBW 444 |
A 403 CR347LN Round bar: | 1mm-800mm |
A 403 CR347LN Square bar: | 10mm * 10mm-600mm *600mm |
A 403 CR347LN Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
A 403 CR347LN Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
A 403 CR347LN Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
A 403 CR347LN Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |