Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaAM-355 material is ASTM SAE AMS 5744E (2007) Steel, Corrosion and Heat-Resistant, Bars and Forgings 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Heat Treated, 170 ksi (1172 MPa) Tensile Strength Steel, Corrosion and Heat-Resistant, Bars and Forgings 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Heat Treated, 170 ksi (1172 MPa) Tensile Strength.
Chemical composition of AM-355, AM-355 mechanical properties, AM-355 datasheet, AM-355 equivalent grade, Heat treatment and temperature process of AM-355.
ASTM SAE AMS 5744E (2007) Steel, Corrosion and Heat-Resistant, Bars and Forgings 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Heat Treated, 170 ksi (1172 MPa) Tensile Strength |
A 564 S35500 |
A 693 S35500 |
A 705 S35500 |
S35500 |
SA-564 S35500 |
SA-693 S35500 |
SA-705 S35500 |
AM-355 |
AM-355 |
AM-355 |
AM-355 |
AM-355 |
AM-355 |
AM-355 |
AM-355 |
AM-355 |
AM-355 |
AM-355 |
C: | Max | 0.15 |
Si: | Max | 0.40 |
Mn: | Max | 1.00 |
P: | Max | Min |
S: | Max | Min |
Ni: | Max | 4.25 |
Cr: | Max | 15.50 |
Al: | Max | Min |
Cu: | Max | Min |
Ti: | Max | Min |
Fe: | Max | remaining |
Mo: | Max | 2.75 |
N: | Max | 0.10 |
Co: | Max | Min |
Rp0.2 (MPa) | 435 (≥) |
Rm (MPa) | 374 (≥) |
AKV (J) | 12 |
A (%) | 23 |
Z (%) | 21 |
Hardness | HBW 244 |
AM-355 Round bar: | 1mm-800mm |
AM-355 Square bar: | 10mm * 10mm-600mm *600mm |
AM-355 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
AM-355 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
AM-355 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
AM-355 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |