Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaAstroloy material is UNS SAE J 467 (1968) Special Purpose Alloys ("Superalloys") Special Purpose Alloys ("Superalloys").
Chemical composition of Astroloy, Astroloy mechanical properties, Astroloy datasheet, Astroloy equivalent grade, Heat treatment and temperature process of Astroloy.
Astroloy |
C: | Max | 0.06 |
Si: | Max | Min |
Mn: | Max | Min |
P: | Max | Min |
S: | Max | Min |
Ni: | Max | remaining |
Cr: | Max | 15.00 |
Al: | Max | 4.40 |
Cu: | Max | Min |
Ti: | Max | 3.50 |
Fe: | Max | Min |
Mo: | Max | 5.25 |
N: | Max | Min |
Co: | Max | 15.00 |
B: | Max | 0.03 |
Rp0.2 (MPa) | 754 (≥) |
Rm (MPa) | 862 (≥) |
AKV (J) | 13 |
A (%) | 22 |
Z (%) | 31 |
Hardness | HBW 313 |
Astroloy Round bar: | 1mm-800mm |
Astroloy Square bar: | 10mm * 10mm-600mm *600mm |
Astroloy Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
Astroloy Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
Astroloy Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
Astroloy Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |