Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaCHROMEL material is UNS SAE J 470 (1976) Wrought nickel and nickel-related alloys Wrought nickel and nickel-related alloys.
Chemical composition of CHROMEL, CHROMEL mechanical properties, CHROMEL datasheet, CHROMEL equivalent grade, Heat treatment and temperature process of CHROMEL.
C: | Max | 0.15 |
Si: | Max | 0.25 |
Mn: | Max | 0.25 |
P: | Max | Min |
S: | Max | Min |
Ni: | Max | remaining |
Cr: | 9.00 | 11.00 |
Al: | Max | Min |
Cu: | Max | Min |
Ti: | Max | Min |
Fe: | Max | 0.50 |
Mo: | Max | Min |
Co: | Max | Min |
B: | 0.003 | 0.015 |
Rp0.2 (MPa) | 422 (≥) |
Rm (MPa) | 515 (≥) |
AKV (J) | 13 |
A (%) | 24 |
Z (%) | 42 |
Hardness | HBW 242 |
CHROMEL Round bar: | 1mm-800mm |
CHROMEL Square bar: | 10mm * 10mm-600mm *600mm |
CHROMEL Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
CHROMEL Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
CHROMEL Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
CHROMEL Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |