Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaCRM-6D material is UNS SAE J 467 (1968) Special Purpose Alloys ("Superalloys") Special Purpose Alloys ("Superalloys").
Chemical composition of CRM-6D, CRM-6D mechanical properties, CRM-6D datasheet, CRM-6D equivalent grade, Heat treatment and temperature process of CRM-6D.
CRM-6D |
C: | Max | 1.00 |
Si: | Max | 0.50 |
Mn: | Max | 5.00 |
P: | Max | Min |
S: | Max | Min |
Ni: | Max | 5.00 |
Cr: | Max | 20.00 |
Al: | Max | Min |
Cu: | Max | Min |
Ti: | Max | Min |
Fe: | Max | remaining |
Mo: | Max | 1.00 |
Co: | Max | Min |
W: | Max | 1.00 |
Nb: | Max | 1.00 |
Rp0.2 (MPa) | 189 (≥) |
Rm (MPa) | 245 (≥) |
AKV (J) | 14 |
A (%) | 32 |
Z (%) | 11 |
Hardness | HBW 321 |
CRM-6D Round bar: | 1mm-800mm |
CRM-6D Square bar: | 10mm * 10mm-600mm *600mm |
CRM-6D Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
CRM-6D Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
CRM-6D Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
CRM-6D Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |