Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaD-H 400 material is UNS SAE J 470 (1976) Wrought nickel and nickel-related alloys Wrought nickel and nickel-related alloys.
Chemical composition of D-H 400, D-H 400 mechanical properties, D-H 400 datasheet, D-H 400 equivalent grade, Heat treatment and temperature process of D-H 400.
D-H 400 |
C: | Max | 0.23 |
Si: | Max | 0.45 |
Mn: | Max | 0.30 |
P: | Max | Min |
S: | Max | Min |
Ni: | Max | 0.40 |
Cr: | Max | 2.80 |
Al: | Max | Min |
Cu: | Max | Min |
Ti: | Max | Min |
Fe: | Max | remaining |
Mo: | Max | 0.50 |
Co: | Max | Min |
V: | Max | 0.75 |
W: | Max | 0.50 |
Rp0.2 (MPa) | 452 (≥) |
Rm (MPa) | 624 (≥) |
AKV (J) | 14 |
A (%) | 24 |
Z (%) | 21 |
Hardness | HBW 414 |
D-H 400 Round bar: | 1mm-800mm |
D-H 400 Square bar: | 10mm * 10mm-600mm *600mm |
D-H 400 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
D-H 400 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
D-H 400 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
D-H 400 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |