Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaD6AC material is ASTM SAE AMS-S-8949B (1998) Steel Bars, Plates, Sheets, Billets, and Reforging Stock Type D6AC Steel Bars, Plates, Sheets, Billets, and Reforging Stock Type D6AC.
Chemical composition of D6AC, D6AC mechanical properties, D6AC datasheet, D6AC equivalent grade, Heat treatment and temperature process of D6AC.
ASTM SAE AMS-S-8949B (1998) Steel Bars, Plates, Sheets, Billets, and Reforging Stock Type D6AC |
C: | Max | 0.47 |
Si: | Max | 0.22 |
Mn: | Max | 0.75 |
P: | Max | Min |
S: | Max | Min |
Ni: | Max | 0.55 |
Cr: | Max | 1.05 |
Al: | Max | Min |
Cu: | Max | Min |
Ti: | Max | Min |
Fe: | Max | remaining |
Mo: | Max | 1.00 |
Co: | Max | Min |
V: | Max | 0.10 |
Rp0.2 (MPa) | 961 (≥) |
Rm (MPa) | 747 (≥) |
AKV (J) | 14 |
A (%) | 21 |
Z (%) | 23 |
Hardness | HBW 143 |
D6AC Round bar: | 1mm-800mm |
D6AC Square bar: | 10mm * 10mm-600mm *600mm |
D6AC Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
D6AC Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
D6AC Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
D6AC Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |