Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaF1058 Grade 2 material is SAE F1058 (2008) Standard Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire and Strip for Surgical Implant Applications (UNS R30003 and UNS R30008) Standard Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire and Strip for Surgical Implant Applications (UNS R30003 and UNS R30008).
Chemical composition of F1058 Grade 2, F1058 Grade 2 mechanical properties, F1058 Grade 2 datasheet, F1058 Grade 2 equivalent grade, Heat treatment and temperature process of F1058 Grade 2.
SAE F1058 (2008) Standard Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire and Strip for Surgical Implant Applications (UNS R30003 and UNS R30008) |
C: | 0.10 | 0.20 |
Si: | 1.00 | 1.40 |
Mn: | 0.50 | 0.80 |
P: | Max | Min |
S: | Max | Min |
Ni: | 19.00 | 22.00 |
Cr: | 7.00 | 9.00 |
Al: | Max | Min |
Cu: | Max | Min |
Ti: | Max | Min |
Fe: | Max | Min |
Mo: | Max | Min |
Co: | Max | Min |
Rp0.2 (MPa) | 565 (≥) |
Rm (MPa) | 212 (≥) |
AKV (J) | 44 |
A (%) | 24 |
Z (%) | 12 |
Hardness | HBW 224 |
F1058 Grade 2 Round bar: | 1mm-800mm |
F1058 Grade 2 Square bar: | 10mm * 10mm-600mm *600mm |
F1058 Grade 2 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
F1058 Grade 2 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
F1058 Grade 2 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
F1058 Grade 2 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |