Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaGMR-235D material is UNS SAE J 467 (1968) Special Purpose Alloys ("Superalloys") Special Purpose Alloys ("Superalloys").
Chemical composition of GMR-235D, GMR-235D mechanical properties, GMR-235D datasheet, GMR-235D equivalent grade, Heat treatment and temperature process of GMR-235D.
GMR-235D |
C: | Max | 0.15 |
Si: | Max | 0.30 |
Mn: | Max | 0.13 |
P: | Max | Min |
S: | Max | Min |
Ni: | Max | remaining |
Cr: | Max | 15.50 |
Al: | Max | 3.00 |
Cu: | Max | Min |
Ti: | Max | 2.00 |
Fe: | Max | 10.00 |
Mo: | Max | 5.25 |
Co: | Max | Min |
B: | Max | 0.06 |
Rp0.2 (MPa) | 169 (≥) |
Rm (MPa) | 694 (≥) |
AKV (J) | 23 |
A (%) | 22 |
Z (%) | 23 |
Hardness | HBW 412 |
GMR-235D Round bar: | 1mm-800mm |
GMR-235D Square bar: | 10mm * 10mm-600mm *600mm |
GMR-235D Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
GMR-235D Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
GMR-235D Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
GMR-235D Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |