Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaHP 9-4-20 material is ASTM SAE AMS 6525D (2012) Steel, Bars, Forgings, Tubing, and Rings 0.75Cr - 9.0Ni - 4.5Co - 1.0Mo - 0.09V (0.17 - 0.23C) Consumable Electrode Vacuum Melted Steel, Bars, Forgings, Tubing, and Rings 0.75Cr - 9.0Ni - 4.5Co - 1.0Mo - 0.09V (0.17 - 0.23C) Consumable Electrode Vacuum Melted.
Chemical composition of HP 9-4-20, HP 9-4-20 mechanical properties, HP 9-4-20 datasheet, HP 9-4-20 equivalent grade, Heat treatment and temperature process of HP 9-4-20.
ASTM SAE AMS 6525D (2012) Steel, Bars, Forgings, Tubing, and Rings 0.75Cr - 9.0Ni - 4.5Co - 1.0Mo - 0.09V (0.17 - 0.23C) Consumable Electrode Vacuum Melted |
A 646 Grade HP 9-4-20 |
HP 9-4-20 |
HP 9-4-20 |
HP 9-4-20 |
HP 9-4-20 |
HP 9-4-25 |
HP 9-4-25 |
A 646 Grade HP 9-4-30 |
HP 9-4-30 |
HP 9-4-30 |
HP 9-4-30 |
HP 9-4-30 |
C: | 0.17 | 0.23 |
Si: | Max | 0.10 |
Mn: | Max | 0.20 |
Ni: | Max | 0.65 |
Cr: | Max | 0.40 |
Al: | 4.25 | 4.75 |
Cu: | Max | Min |
Ti: | Max | Min |
Fe: | Max | Min |
Mo: | Max | 0.85 |
Co: | 8.50 | 9.50 |
V: | 0.06 | 0.12 |
P: | Max | 0.01 |
S: | Max | 0.01 |
W: | 0.90 | 1.10 |
Rp0.2 (MPa) | 259 (≥) |
Rm (MPa) | 918 (≥) |
AKV (J) | 11 |
A (%) | 14 |
Z (%) | 44 |
Hardness | HBW 222 |
HP 9-4-20 Round bar: | 1mm-800mm |
HP 9-4-20 Square bar: | 10mm * 10mm-600mm *600mm |
HP 9-4-20 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
HP 9-4-20 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
HP 9-4-20 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
HP 9-4-20 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |