Certified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In China
HR10
HR10 material is B.S. BS HR 10 (1972) Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5) B.S. BS 2HR 10 (2010) Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5) Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5).
Chemical composition of HR10, HR10 mechanical properties, HR10 datasheet, HR10 equivalent grade, Heat treatment and temperature process of HR10.
HR10 property sheet
HR10 Spec.
| B.S. BS HR 10 (1972) Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5) |
| B.S. BS 2HR 10 (2010) Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5) |
Chemical Composition of HR10
| C: | 0.04 | 0.08 |
| Si: | 0.40 | Min |
| Mn: | 0.60 | Min |
| P: | Max | Min |
| S: | Max | 0.007 |
| Cr: | 19.00 | 21.00 |
| Ni: | Max | remaining |
| Mo: | 5.60 | 6.10 |
| Co: | 19.00 | 21.00 |
| Ti: | 1.90 | 2.40 |
| Fe: | Max | 0.70 |
| Cu: | Max | 0.20 |
| B: | Max | 0.0050 |
| Bi: | Max | 0.0001 |
| Pb: | Max | 0.0020 |
| Ag: | Max | 0.0005 |
Mechanical Properties of HR10
| Rp0.2 (MPa) | 983 (≥) |
| Rm (MPa) | 772 (≥) |
| AKV (J) | 42 |
| A (%) | 23 |
| Z (%) | 43 |
| Hardness | HBW 421 |
HR10 shape and dimensions
| HR10 Round bar: | 1mm-800mm |
| HR10 Square bar: | 10mm * 10mm-600mm *600mm |
| HR10 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
| HR10 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
| HR10 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
| HR10 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |
©Longhai Special Steel 2024
