Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaHR205 material is B.S. BS HR 205 (1989) Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resisting alloy plate, sheet and strip (nickel base Cr 22, Fe 18.5, Mo 9, Co 1.5, W 0.6) B.S. BS 2HR 205 (2009) Specification for nickel-copper alloy sheet and strip: annealed (nickel base, Cu 31) Specification for nickel-copper alloy sheet and strip: annealed (nickel base, Cu 31).
Chemical composition of HR205, HR205 mechanical properties, HR205 datasheet, HR205 equivalent grade, Heat treatment and temperature process of HR205.
B.S. BS HR 205 (1989) Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resisting alloy plate, sheet and strip (nickel base Cr 22, Fe 18.5, Mo 9, Co 1.5, W 0.6) |
B.S. BS 2HR 205 (2009) Specification for nickel-copper alloy sheet and strip: annealed (nickel base, Cu 31) |
HR205 |
C: | Max | 0.16 |
Si: | Max | 0.50 |
Mn: | Max | 2.00 |
P: | Max | Min |
S: | Max | 0.020 |
Cr: | Max | Min |
Ni: | 63.00 | Min |
Mo: | Max | Min |
Co: | Max | 2.00 |
Ti: | Max | Min |
Fe: | Max | 2.50 |
Al: | Max | 0.50 |
Cu: | 28.00 | 34.00 |
Rp0.2 (MPa) | 935 (≥) |
Rm (MPa) | 332 (≥) |
AKV (J) | 24 |
A (%) | 13 |
Z (%) | 11 |
Hardness | HBW 323 |
HR205 Round bar: | 1mm-800mm |
HR205 Square bar: | 10mm * 10mm-600mm *600mm |
HR205 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
HR205 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
HR205 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
HR205 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |