Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaHR206 material is B.S. BS HR 206 (1973) Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy plate, sheet and strip (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5) B.S. BS 2HR 206 (2009) Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy plate, sheet and strip (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5) Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy plate, sheet and strip (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5).
Chemical composition of HR206, HR206 mechanical properties, HR206 datasheet, HR206 equivalent grade, Heat treatment and temperature process of HR206.
B.S. BS HR 206 (1973) Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy plate, sheet and strip (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5) |
B.S. BS 2HR 206 (2009) Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy plate, sheet and strip (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5) |
HR206 |
C: | 0.04 | 0.08 |
Si: | Max | 0.40 |
Mn: | Max | 0.60 |
P: | Max | Min |
S: | Max | 0.007 |
Cr: | 19.00 | 21.00 |
Ni: | Max | remaining |
Mo: | 5.60 | 6.10 |
Co: | 19.00 | 21.00 |
Ti: | 1.90 | 2.40 |
Fe: | Max | 0.70 |
Al: | 0.30 | 0.60 |
Ag: | Max | 0.0005 |
Al+Ti: | 2.40 | 2.80 |
Cu: | Max | 0.20 |
B: | Max | 0.005 |
Bi: | Max | 0.0001 |
Pb: | Max | 0.002 |
Rp0.2 (MPa) | 491 (≥) |
Rm (MPa) | 566 (≥) |
AKV (J) | 31 |
A (%) | 43 |
Z (%) | 22 |
Hardness | HBW 433 |
HR206 Round bar: | 1mm-800mm |
HR206 Square bar: | 10mm * 10mm-600mm *600mm |
HR206 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
HR206 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
HR206 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
HR206 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |