Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaHR207 material is B.S. BS HR 207 (1973) Specification for nickel-iron-chromium-molybdenum-aluminium-titanium heat-resisting alloy plate, sheet and strip (Ni/Co 43.5, Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2, Fe remainder) B.S. BS 2HR 207 (2009) Specification for nickel-iron-chromium-molybdenum-aluminium-titanium heat-resisting alloy plate, sheet and strip (Ni/Co 43.5, Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2, Fe remainder) Specification for nickel-iron-chromium-molybdenum-aluminium-titanium heat-resisting alloy plate, sheet and strip (Ni/Co 43.5, Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2, Fe remainder).
Chemical composition of HR207, HR207 mechanical properties, HR207 datasheet, HR207 equivalent grade, Heat treatment and temperature process of HR207.
B.S. BS HR 207 (1973) Specification for nickel-iron-chromium-molybdenum-aluminium-titanium heat-resisting alloy plate, sheet and strip (Ni/Co 43.5, Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2, Fe remainder) |
B.S. BS 2HR 207 (2009) Specification for nickel-iron-chromium-molybdenum-aluminium-titanium heat-resisting alloy plate, sheet and strip (Ni/Co 43.5, Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2, Fe remainder) |
HR207 |
C: | 0.04 | 0.08 |
Si: | Max | 0.50 |
Mn: | Max | 0.20 |
P: | Max | Min |
S: | Max | 0.015 |
Cr: | 15.50 | 17.50 |
Ni: | 42.00 | 45.00 |
Mo: | 2.80 | 3.80 |
Co: | Max | 2.00 |
Ti: | 1.10 | 1.30 |
Fe: | Max | remaining |
Al: | 1.10 | 1.30 |
Cu: | Max | 0.50 |
Zr: | 0.02 | 0.04 |
B: | Max | 0.0050 |
Bi: | Max | 0.0001 |
Pb: | Max | 0.0015 |
Ag: | Max | 0.0005 |
Rp0.2 (MPa) | 293 (≥) |
Rm (MPa) | 839 (≥) |
AKV (J) | 33 |
A (%) | 21 |
Z (%) | 31 |
Hardness | HBW 412 |
HR207 Round bar: | 1mm-800mm |
HR207 Square bar: | 10mm * 10mm-600mm *600mm |
HR207 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
HR207 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
HR207 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
HR207 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |