Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaHR52 material is B.S. BS 2HR 52 (2010) Specification for heat-resisting steel billets, bars, forgings and parts (Ni 25.5, Cr 14.7, Ti 1.8, Mn 1.5, Mo 1.2, V 0.3) B.S. BS HR 52 Specification for heat-resisting alloy billets, bars, forgings and parts (Ni 25.5, Cr 14.7, Ti 1.8, Mn 1.5, Mo 1.2, V 0.3, Fe remainder) Specification for heat-resisting alloy billets, bars, forgings and parts (Ni 25.5, Cr 14.7, Ti 1.8, Mn 1.5, Mo 1.2, V 0.3, Fe remainder).
Chemical composition of HR52, HR52 mechanical properties, HR52 datasheet, HR52 equivalent grade, Heat treatment and temperature process of HR52.
B.S. BS 2HR 52 (2010) Specification for heat-resisting steel billets, bars, forgings and parts (Ni 25.5, Cr 14.7, Ti 1.8, Mn 1.5, Mo 1.2, V 0.3) |
B.S. BS HR 52 Specification for heat-resisting alloy billets, bars, forgings and parts (Ni 25.5, Cr 14.7, Ti 1.8, Mn 1.5, Mo 1.2, V 0.3, Fe remainder) |
HR52 |
C: | Max | 0.06 |
Si: | Max | 0.50 |
Mn: | Max | 2.00 |
P: | Max | 0.020 |
S: | Max | 0.015 |
Cr: | 13.50 | 16.00 |
Ni: | 24.00 | 27.00 |
Mo: | 1.00 | 1.50 |
Co: | Max | Min |
Ti: | 1.70 | 2.00 |
Fe: | Max | remaining |
Al: | Max | 0.35 |
V: | 0.10 | 0.50 |
B: | 0.0030 | 0.0100 |
Pb: | Max | 0.005 |
Rp0.2 (MPa) | 139 (≥) |
Rm (MPa) | 441 (≥) |
AKV (J) | 23 |
A (%) | 21 |
Z (%) | 12 |
Hardness | HBW 224 |
HR52 Round bar: | 1mm-800mm |
HR52 Square bar: | 10mm * 10mm-600mm *600mm |
HR52 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
HR52 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
HR52 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
HR52 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |