High quality special steel supplier.Old rev.
  • Certified Company

    DNV&ABS
  • Certified Company

    ISO 9001:2008
  • R&D Production

    In China

ISO 15


ISO 15 material is ISO ISO 15510 (2010) Stainless steels -- Chemical composition ISO ISO 16143-1 (2004) Stainless steels for general purposes -- Part 1: Flat products ISO ISO 16143-2 (2004) Stainless steels for general purposes -- Part 2: Semi-finished products, bars, rods and sections ISO ISO 16143-3 (2005) Stainless steels for general purposes -- Part 3: Wire ISO ISO 9327-5 Steel forgings and rolled or forged bars for pressure purposes - Technical delivery conditions - Part 5: Stainless steels ISO ISO 9328-5 Steel plates and strips for pressure purposes - Technical delivery conditions - Part 5: Weldable fine grain steels, thermomechanically rolled ISO ISO 9328-7 (2011) Steel flat products for pressure purposes - Technical delivery conditions - Part 7: Stainless steels ISO ISO 9329-4 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Austenitic stainless steels ISO ISO 9330-6 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Longitudinally welded austenitic stainless steel tubes ISO ISO/TS 15510 (2003) Stainless steels - Chemical composition Stainless steels - Chemical composition.

Chemical composition of ISO 15, ISO 15 mechanical properties, ISO 15 datasheet, ISO 15 equivalent grade, Heat treatment and temperature process of ISO 15.


ISO 15 property sheet

ISO 15 Spec.

ISO ISO 15510 (2010)
Stainless steels -- Chemical composition
ISO ISO 16143-1 (2004)
Stainless steels for general purposes -- Part 1: Flat products
ISO ISO 16143-2 (2004)
Stainless steels for general purposes -- Part 2: Semi-finished products, bars, rods and sections
ISO ISO 16143-3 (2005)
Stainless steels for general purposes -- Part 3: Wire
ISO ISO 9327-5
Steel forgings and rolled or forged bars for pressure purposes - Technical delivery conditions - Part 5: Stainless steels
ISO ISO 9328-5
Steel plates and strips for pressure purposes - Technical delivery conditions - Part 5: Weldable fine grain steels, thermomechanically rolled
ISO ISO 9328-7 (2011)
Steel flat products for pressure purposes - Technical delivery conditions - Part 7: Stainless steels
ISO ISO 9329-4
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Austenitic stainless steels
ISO ISO 9330-6
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Longitudinally welded austenitic stainless steel tubes
ISO ISO/TS 15510 (2003)
Stainless steels - Chemical composition

Related Materials

ISO 15

Chemical Composition of ISO 15

C: Max 0.08
Si: Max 1.00
Mn: Max 2.00
P: Max 0.045
S: Max 0.030
Cr: 17.00 19.00
Ni: 9.00 12.00
Mo: Max Min
N: Max Min
Ti: 5×C% 0.70

Mechanical Properties of ISO 15

Rp0.2 (MPa) 284 (≥)
Rm (MPa) 499 (≥)
AKV (J) 44
A (%) 23
Z (%) 23
Hardness HBW 311

ISO 15 shape and dimensions

ISO 15 Round bar: 1mm-800mm
ISO 15 Square bar: 10mm * 10mm-600mm *600mm
ISO 15 Flat bar: Thickness:8mm-800mm Width:10mm to 1500mm
ISO 15 Sheet or Plate: Thickness:3mm-80mm Width:1.5mm to 1500mm
ISO 15 Strip or Coil: Thickness:0.1mm-3mm Width:1.5mm-1500mm
ISO 15 Forgings: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes