Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaLapelloy C material is UNS SAE J 467 (1968) Special Purpose Alloys ("Superalloys") Special Purpose Alloys ("Superalloys").
Chemical composition of Lapelloy C, Lapelloy C mechanical properties, Lapelloy C datasheet, Lapelloy C equivalent grade, Heat treatment and temperature process of Lapelloy C.
Lapelloy C |
C: | Max | 0.22 |
Si: | Max | 0.25 |
Mn: | Max | 0.80 |
Ni: | Max | 0.20 |
Cr: | Max | 11.50 |
Al: | Max | Min |
Cu: | Max | 2.00 |
Ti: | Max | Min |
Fe: | Max | remaining |
Mo: | Max | 2.75 |
Co: | Max | Min |
N: | Max | 0.08 |
Rp0.2 (MPa) | 978 (≥) |
Rm (MPa) | 376 (≥) |
AKV (J) | 31 |
A (%) | 32 |
Z (%) | 13 |
Hardness | HBW 342 |
Lapelloy C Round bar: | 1mm-800mm |
Lapelloy C Square bar: | 10mm * 10mm-600mm *600mm |
Lapelloy C Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
Lapelloy C Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
Lapelloy C Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
Lapelloy C Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |