Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaM-252 material is UNS SAE J 467 (1968) Special Purpose Alloys ("Superalloys") Special Purpose Alloys ("Superalloys").
Chemical composition of M-252, M-252 mechanical properties, M-252 datasheet, M-252 equivalent grade, Heat treatment and temperature process of M-252.
M-252 |
C: | Max | 0.15 |
Si: | Max | 0.50 |
Mn: | Max | 0.50 |
Ni: | Max | remaining |
Cr: | Max | 20.00 |
Al: | Max | 1.00 |
Cu: | Max | Min |
Ti: | Max | 2.60 |
Fe: | Max | Min |
Mo: | Max | 10.00 |
Co: | Max | 10.00 |
B: | Max | 0.005 |
Rp0.2 (MPa) | 183 (≥) |
Rm (MPa) | 692 (≥) |
AKV (J) | 34 |
A (%) | 13 |
Z (%) | 13 |
Hardness | HBW 124 |
M-252 Round bar: | 1mm-800mm |
M-252 Square bar: | 10mm * 10mm-600mm *600mm |
M-252 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
M-252 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
M-252 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
M-252 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |