Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaMAR-M 509 material is UNS SAE J 467 (1968) Special Purpose Alloys ("Superalloys") Special Purpose Alloys ("Superalloys").
Chemical composition of MAR-M 509, MAR-M 509 mechanical properties, MAR-M 509 datasheet, MAR-M 509 equivalent grade, Heat treatment and temperature process of MAR-M 509.
MAR-M 509 |
C: | Max | 0.60 |
Si: | Max | 0.05 |
Mn: | Max | 0.05 |
Cr: | Max | 23.00 |
Ni: | Max | 10.00 |
Mo: | Max | Min |
Co: | Max | remaining |
W: | Max | 7.00 |
Al: | Max | Min |
Cu: | Max | Min |
Ti: | Max | 0.20 |
Fe: | Max | Min |
Ta: | Max | 3.50 |
Zr: | Max | 0.50 |
B: | Max | 0.005 |
Rp0.2 (MPa) | 519 (≥) |
Rm (MPa) | 839 (≥) |
AKV (J) | 41 |
A (%) | 31 |
Z (%) | 14 |
Hardness | HBW 333 |
MAR-M 509 Round bar: | 1mm-800mm |
MAR-M 509 Square bar: | 10mm * 10mm-600mm *600mm |
MAR-M 509 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
MAR-M 509 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
MAR-M 509 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
MAR-M 509 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |