Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaNA18 material is B.S. BS 3072 Specification for nickel and nickel alloys: sheet and plate B.S. BS 3073 Specification for nickel and nickel alloys: strip B.S. BS 3074 Specification for nickel and nickel alloys: seamless tube B.S. BS 3076 Specification for nickel and nickel alloys: bar Specification for nickel and nickel alloys: bar.
Chemical composition of NA18, NA18 mechanical properties, NA18 datasheet, NA18 equivalent grade, Heat treatment and temperature process of NA18.
B.S. BS 3072 Specification for nickel and nickel alloys: sheet and plate |
B.S. BS 3073 Specification for nickel and nickel alloys: strip |
B.S. BS 3074 Specification for nickel and nickel alloys: seamless tube |
B.S. BS 3076 Specification for nickel and nickel alloys: bar |
NA18 |
C: | Max | 0.25 |
Si: | Max | 0.50 |
Mn: | Max | 1.50 |
P: | Max | Min |
S: | Max | 0.010 |
Cr: | Max | Min |
Ni+Co: | 63.00 | Min |
Mo: | Max | Min |
Al: | 2.30 | 3.20 |
Cu: | 27.00 | 33.00 |
Ti: | 0.35 | 0.85 |
Fe: | Max | 2.00 |
Rp0.2 (MPa) | 387 (≥) |
Rm (MPa) | 172 (≥) |
AKV (J) | 33 |
A (%) | 13 |
Z (%) | 43 |
Hardness | HBW 423 |
NA18 Round bar: | 1mm-800mm |
NA18 Square bar: | 10mm * 10mm-600mm *600mm |
NA18 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
NA18 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
NA18 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
NA18 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |