Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaNA19 material is B.S. BS 3075 Specification for nickel and nickel alloys: wire Specification for nickel and nickel alloys: wire.
Chemical composition of NA19, NA19 mechanical properties, NA19 datasheet, NA19 equivalent grade, Heat treatment and temperature process of NA19.
NA19 |
C: | Max | 0.13 |
Si: | Max | 1.50 |
Mn: | Max | 1.00 |
P: | Max | Min |
S: | Max | 0.015 |
Cr: | 18.00 | 21.00 |
Ni: | Max | remaining |
Mo: | Max | Min |
Al: | 0.80 | 2.00 |
Cu: | Max | Min |
Ti: | 1.80 | 3.00 |
Fe: | Max | 3.00 |
Co: | 15.00 | 21.00 |
B: | 0.0010 | 0.0300 |
Zr: | Max | 0.15 |
Rp0.2 (MPa) | 711 (≥) |
Rm (MPa) | 884 (≥) |
AKV (J) | 23 |
A (%) | 32 |
Z (%) | 11 |
Hardness | HBW 433 |
NA19 Round bar: | 1mm-800mm |
NA19 Square bar: | 10mm * 10mm-600mm *600mm |
NA19 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
NA19 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
NA19 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
NA19 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |