Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaNichrome I material is UNS SAE J 470 (1976) Wrought nickel and nickel-related alloys Wrought nickel and nickel-related alloys.
Chemical composition of Nichrome I, Nichrome I mechanical properties, Nichrome I datasheet, Nichrome I equivalent grade, Heat treatment and temperature process of Nichrome I.
NICHROME |
Nichrome I |
Nichrome V |
Nichrome V |
Nichrome V |
Nichrome V |
Nichrome V |
Nichrome V |
Nichrome V |
Nichrome V |
Nichrome V |
Nichrome V |
Nichrome V |
Nichrome V |
Nichrome V |
Nichrome V |
C: | Max | 0.15 |
Si: | 0.75 | 1.60 |
Mn: | Max | 1.00 |
Cr: | 14.00 | 18.00 |
Ni: | Max | 57.00 |
Mo: | Max | Min |
Co: | Max | Min |
W: | Max | Min |
Al: | Max | Min |
Cu: | Max | Min |
Ti: | Max | Min |
Fe: | Max | remaining |
Rp0.2 (MPa) | 489 (≥) |
Rm (MPa) | 725 (≥) |
AKV (J) | 24 |
A (%) | 34 |
Z (%) | 12 |
Hardness | HBW 114 |
Nichrome I Round bar: | 1mm-800mm |
Nichrome I Square bar: | 10mm * 10mm-600mm *600mm |
Nichrome I Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
Nichrome I Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
Nichrome I Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
Nichrome I Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |