Certified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In China
PH 13-8Mo
PH 13-8Mo material is UNS SAE AMS 5840E (2010) Steel, Corrosion and Heat Resistant, Welding Wire 13Cr - 8.0Ni - 2.3Mo - 1.1Al Vacuum Melted Steel, Corrosion and Heat Resistant, Welding Wire 13Cr - 8.0Ni - 2.3Mo - 1.1Al Vacuum Melted.
Chemical composition of PH 13-8Mo, PH 13-8Mo mechanical properties, PH 13-8Mo datasheet, PH 13-8Mo equivalent grade, Heat treatment and temperature process of PH 13-8Mo.
PH 13-8Mo property sheet
PH 13-8Mo Spec.
| UNS SAE AMS 5840E (2010) Steel, Corrosion and Heat Resistant, Welding Wire 13Cr - 8.0Ni - 2.3Mo - 1.1Al Vacuum Melted |
Related Materials
Chemical Composition of PH 13-8Mo
| C: | Max | 0.05 |
| Si: | Max | Min |
| Mn: | Max | Min |
| Cr: | 12.25 | 13.25 |
| Ni: | 7.50 | 8.50 |
| Mo: | 2.00 | 2.50 |
| Co: | Max | Min |
| W: | Max | Min |
| Al: | 0.90 | 1.35 |
| Cu: | Max | Min |
| Ti: | Max | Min |
| Fe: | Max | Min |
Mechanical Properties of PH 13-8Mo
| Rp0.2 (MPa) | 484 (≥) |
| Rm (MPa) | 919 (≥) |
| AKV (J) | 14 |
| A (%) | 13 |
| Z (%) | 34 |
| Hardness | HBW 413 |
PH 13-8Mo shape and dimensions
| PH 13-8Mo Round bar: | 1mm-800mm |
| PH 13-8Mo Square bar: | 10mm * 10mm-600mm *600mm |
| PH 13-8Mo Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
| PH 13-8Mo Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
| PH 13-8Mo Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
| PH 13-8Mo Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |
©Longhai Special Steel © 2005-2024
