Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaPH 15-7 Mo material is UNS SAE AMS 5520G (2009) Steel, Corrosion and Heat-Resistant, Sheet, Strip, Foil, and Plate 15Cr - 7.1Ni - 2.5Mo - 1.1AI Solution Heat Treated, Precipitation Hardenable Steel, Corrosion and Heat-Resistant, Sheet, Strip, Foil, and Plate 15Cr - 7.1Ni - 2.5Mo - 1.1AI Solution Heat Treated, Precipitation Hardenable.
Chemical composition of PH 15-7 Mo, PH 15-7 Mo mechanical properties, PH 15-7 Mo datasheet, PH 15-7 Mo equivalent grade, Heat treatment and temperature process of PH 15-7 Mo.
UNS SAE AMS 5520G (2009) Steel, Corrosion and Heat-Resistant, Sheet, Strip, Foil, and Plate 15Cr - 7.1Ni - 2.5Mo - 1.1AI Solution Heat Treated, Precipitation Hardenable |
A 564 S15700 |
A 693 S15700 |
A 705 S15700 |
S15700 |
SA-564 S15700 |
SA-693 S15700 |
SA-705 S15700 |
PH 15-7 Mo |
PH 15-7 Mo |
PH 15-7 Mo |
PH 15-7 Mo |
PH 15-7 Mo |
PH 15-7 Mo |
PH 15-7 Mo |
C: | Max | 0.07 |
Si: | Max | 0.30 |
Mn: | Max | 0.50 |
Cr: | Max | 15.00 |
Ni: | Max | 7.00 |
Mo: | Max | 2.20 |
Co: | Max | Min |
W: | Max | Min |
Al: | Max | 1.17 |
Cu: | Max | Min |
Ti: | Max | Min |
Fe: | Max | remaining |
Rp0.2 (MPa) | 812 (≥) |
Rm (MPa) | 929 (≥) |
AKV (J) | 41 |
A (%) | 12 |
Z (%) | 13 |
Hardness | HBW 143 |
PH 15-7 Mo Round bar: | 1mm-800mm |
PH 15-7 Mo Square bar: | 10mm * 10mm-600mm *600mm |
PH 15-7 Mo Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
PH 15-7 Mo Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
PH 15-7 Mo Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
PH 15-7 Mo Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |