Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaS-816 material is SAE SAE J 467 (1968) Special Purpose Alloys ("Superalloys") Special Purpose Alloys ("Superalloys").
Chemical composition of S-816, S-816 mechanical properties, S-816 datasheet, S-816 equivalent grade, Heat treatment and temperature process of S-816.
S-816 |
C: | Max | 0.37 |
Si: | Max | 0.55 |
Mn: | Max | 1.50 |
Cr: | Max | 20.00 |
Ni: | Max | 20.00 |
Mo: | Max | 4.00 |
Co: | Max | remaining |
W: | Max | 4.00 |
Al: | Max | Min |
Cu: | Max | Min |
Ti: | Max | Min |
Fe: | Max | 3.40 |
Nb: | Max | 4.00 |
Rp0.2 (MPa) | 532 (≥) |
Rm (MPa) | 411 (≥) |
AKV (J) | 13 |
A (%) | 42 |
Z (%) | 32 |
Hardness | HBW 412 |
S-816 Round bar: | 1mm-800mm |
S-816 Square bar: | 10mm * 10mm-600mm *600mm |
S-816 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
S-816 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
S-816 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
S-816 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |