Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaS590 material is SAE SAE J 467 (1968) Special Purpose Alloys ("Superalloys") Special Purpose Alloys ("Superalloys").
Chemical composition of S590, S590 mechanical properties, S590 datasheet, S590 equivalent grade, Heat treatment and temperature process of S590.
S590 |
C: | Max | 0.43 |
Si: | Max | 0.40 |
Mn: | Max | 1.25 |
Cr: | Max | 21.00 |
Ni: | Max | 20.00 |
Mo: | Max | 4.00 |
Co: | Max | 20.00 |
W: | Max | 4.00 |
Al: | Max | Min |
Cu: | Max | Min |
Ti: | Max | Min |
Fe: | Max | remaining |
Nb: | Max | 4.00 |
Rp0.2 (MPa) | 837 (≥) |
Rm (MPa) | 714 (≥) |
AKV (J) | 12 |
A (%) | 31 |
Z (%) | 12 |
Hardness | HBW 224 |
S590 Round bar: | 1mm-800mm |
S590 Square bar: | 10mm * 10mm-600mm *600mm |
S590 Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
S590 Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
S590 Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
S590 Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |