Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaSA-479 Type 316Cb material is AMS SA-479/SA-479M Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels.
Chemical composition of SA-479 Type 316Cb, SA-479 Type 316Cb mechanical properties, SA-479 Type 316Cb datasheet, SA-479 Type 316Cb equivalent grade, Heat treatment and temperature process of SA-479 Type 316Cb.
AMS SA-479/SA-479M Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
C: | Max | 0.08 |
Si: | Max | 1.00 |
Mn: | Max | 2.00 |
P: | Max | 0.045 |
S: | Max | 0.03 |
Cr: | 16.0 | 18.0 |
Ni: | 10.0 | 14.0 |
Mo: | 2.00 | 3.00 |
N: | Max | 0.10 |
Carbon equivalent: | Max | 10xC≤b≤1.10 |
Rp0.2 (MPa) | 766 (≥) |
Rm (MPa) | 869 (≥) |
AKV (J) | 12 |
A (%) | 43 |
Z (%) | 33 |
Hardness | HBW 123 |
SA-479 Type 316Cb Round bar: | 1mm-800mm |
SA-479 Type 316Cb Square bar: | 10mm * 10mm-600mm *600mm |
SA-479 Type 316Cb Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
SA-479 Type 316Cb Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
SA-479 Type 316Cb Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
SA-479 Type 316Cb Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |