Certified Company
DNV&ABSCertified Company
DNV&ABSCertified Company
ISO 9001:2008R&D Production
In ChinaSA-479 Type 316Ti material is AMS SA-479/SA-479M Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels .
Chemical composition of SA-479 Type 316Ti, SA-479 Type 316Ti mechanical properties, SA-479 Type 316Ti datasheet, SA-479 Type 316Ti equivalent grade, Heat treatment and temperature process of SA-479 Type 316Ti.
AMS SA-479/SA-479M Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
C: | Max | 0.08 |
Si: | Max | 1.00 |
Mn: | Max | 2.00 |
P: | Max | 0.045 |
S: | Max | 0.03 |
Cr: | 16.0 | 18.0 |
Ni: | 10.0 | 14.0 |
Mo: | 2.00 | 3.00 |
N: | Max | 0.10 |
Ti: | Max | 5(C+N)≤Ti≤0.70 |
Rp0.2 (MPa) | 428 (≥) |
Rm (MPa) | 354 (≥) |
AKV (J) | 43 |
A (%) | 31 |
Z (%) | 14 |
Hardness | HBW 113 |
SA-479 Type 316Ti Round bar: | 1mm-800mm |
SA-479 Type 316Ti Square bar: | 10mm * 10mm-600mm *600mm |
SA-479 Type 316Ti Flat bar: | Thickness:8mm-800mm Width:10mm to 1500mm |
SA-479 Type 316Ti Sheet or Plate: | Thickness:3mm-80mm Width:1.5mm to 1500mm |
SA-479 Type 316Ti Strip or Coil: | Thickness:0.1mm-3mm Width:1.5mm-1500mm |
SA-479 Type 316Ti Forgings: | Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes |